1" (25 mm) Silk Dome Tweeter with 4" Decorative Cast Aluminum Face Plate

Brand Name
Oaktron by MISCO
Model #
Part #
In stock

This silk Soft Dome Tweeter is one of our best. The transducer technology provides clear, crisp high frequency performance and uses a custom designed silk dome.  First time listeners are usually impressed withe quality and depth it produces. The smooth frequency response is due in part, to the thin silk membrane's agility. It's wide bandwidth and high sensitivity would be a suitable match for most woofers. 

  • Black 4" Aluminum Face Plate
  • Costum designed, 25mm silk dome
  • Light weight CCA voice coil wound on a polyimide form 
  • Ferrofluid cooled and damped
  • Flat Frequency Response

Note: Protect the tweeters that are installed in your audio system. Lower frequencies are not desirable signals to send to a tweeter. They can damage or destroy the tweeter diaphragm. Protection is important. Use a simple passive crossover (First Order), by using a (proper value) capacitor to stop low frequencies from making it to the tweeter. You can also further refine your audio system by adding more complex crossovers with inductors and more capacitors and resistors. Or, ultimately you may want to add an active crossover system.

MISCO engineers test and analyze the performance of these speakers using the world's most sophisticated loudspeaker measurement systems including the Klippel Analyzer and the Klippel QC, which are used to validate final design.  

Download Product Specifications (PDF) »

More Information
Brand Name Oaktron by MISCO
Model # 25-TD08-03
Size, Nominal (inch & mm) 1" (25mm)
Shape of Speaker Round
Speaker Type Tweeter
Application High-End Audio and Home Theater, Home Audio, Indoor
Environment Indoor
RoHS Compliant Yes
Nominal Impedance (Z) (Ω) 8
Rated Power IEC268-5 (W) 20 Watts
Rated impedance (Ω) 8
Power, Continuous (W) 20
Power, Program (W) 40
Frequency range (Hz) 1200-20,000
Sensitivity (dB SPL) ¹ 90
Resonant Frequency (Fs) (Hz) 1105
DC resistance (Re) (Ω) 7.2
Voice Coil Inductance (Le) (mH) 0.06
Mechanical Q factor (Qms) 2.41
Electrical Q Factor (Qes) 1.26
Total Q factor (Qts) 0.83
Mechanical Resistance (Rms) (kg/s) 0.67
Compliance equivalent volume (Vas) (L) .01
Suspension Compliance (Cms) (mm/N) .09
Surface area of diaphragm (Sd) (cm²) 6.6
Moving mass (Mms) (gm) .23
Motor Force Factor (BL) (T•M) 3.0
Efficiency (η₀) (%) 0.57
Terminal size 2.8 x 0.5mm (0.110 x 0.020")
Voice coil diameter (mm) 25 mm (1")
Voice coil wire material Copper Clad Aluminum (CCA)
Voice coil former material Polyimide film
Voice Coil Winding Single voice coil, 2 layers
Magnet Material Neodymium
Magnet weight (gm) 252 (8.9 oz)
Cone body material Silk
Cone surround material Silk
Net weight (kg) 0.57
Technical Notes

¹ Sensitivity is measured with 2.83 volt input, measured on-axis at 1 meter distance